Related Manuals for Planet ICO-HM230
Summary of Contents for Planet ICO-HM230
- Page 1 H.264 Internet Camera ICA-HM230 / ICA-H312 / ICA-H651 / ICA-HM130 / ICA-HM135 / ICA-HM350 Quick Installation Guide Version 1.0...
-
Page 2: Table Of Contents
Table of Contents Chapter 1. Introduction ..................3 1.1 Before Installation ................. 3 1.2 System Requirements ................3 Chapter 2. Physical Description and Installation ..........4 2.1 ICA-HM230 H.264 Mega-Pixel CMOS Pan/Tilt Internet Camera ....4 2.1.1 ICA-HM230 Package Content ............4 2.1.2 ICA-HM230 Physical Details ............ -
Page 3: Chapter 1. Introduction
Chapter 1. Introduction Thank you for purchasing the PLANET H.264 IP Camera. It is versatile and high image solution of surveillance application for day and night. The Pan/Tilt IP Camera is also a stand-alone camera system with a built-in processor and web server that provides highest quality video and system performance. -
Page 4: Chapter 2. Physical Description And Installation
Chapter 2. Physical Description and Installation 2.1 ICA-HM230 H.264 Mega-Pixel CMOS Pan/Tilt Internet Camera 2.1.1 ICA-HM230 Package Content IP Camera Unit x 1 Power Adapter x 1 Camera Mount Kit x 1 User’s Manual CD-ROM x 1 Quick Installation Guide x 1 If any of the above items are missing, please contact your dealer immediately. -
Page 5: Ica-Hm230 Installation
1. Audio Output It allows this device to output audio or alerting sound. Connect with a 3.5Ø phone jack speaker (external adaptor). 2. Power Jack The input power is DC 12V. 1. Only use the power adapter supplied with internet camera Otherwise, the product may be damaged. -
Page 6: Ica-H312 H.264 25-Meter Ir Internet Camera
3. Connect the LAN cable to a switch or hub. When this switch/hub is a PoE device, you can ignore the next step. 4. Connect DC-Jack to the with the bundle power adapter power source. 5. Done. Wall Mount 1. Fix the L-type bracket to the wall using two holly wall anchors and screws. 2. -
Page 7: Ica-H312 Physical Details
2.2.2 ICA-H312 Physical Details 1. RJ-45 LAN socket: Connect to PC or Hub/Switch. For connect to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of the network automatically. Please use CAT-5 cable to connect the IP camera to a 100Mbps Fast Ethernet network switch or hub. -
Page 8: Ica-H312 Installation
3. Reset Button This button is used to restore the all factory default settings. Sometimes restarting the device will make the system back to a normal state. However, if the system still got problems after restart, user can restore the factory default settings and install it again. -
Page 9: Ica-H651 H.264 Outdoor Speed Dome Internet Camera
2.3 ICA-H651 H.264 Outdoor Speed Dome Internet Camera 2.3.1 ICA-H651 Package Content IP Camera Unit x 1 Power Adapter x 1 Power Box Wall Mount Kit x 1 Power Box Electric Wire Kit x 1 Camera Bracket Screws Kit x 1 Waterproof Strip x 1 Terminal Block x 2 Video and Audio Cable x 3... -
Page 10: Ica-H651 Installation
2. RS-485: Connect to a local keyboard controller. DI/DO: Connect to sensor in and alarm out devices. Name Function DC 12V DC 12V (60mA maximum) RS485 data + RS485 data - Digital signal input (Digital In) Digital signal output (Alarm Out) 3. - Page 11 5. Mount the Safety Hanging-Lock of the outdoor flange on the outdoor speed dome. Aim the guide pin of mounting base at the longest curved chute of outdoor flange. Fix the speed dome on the outdoor flange. Tighten the screw as figure.
-
Page 12: Ica-Hm130 H.264 Mega-Pixel Dome Internet Camera
4. Mount the Safety Hanging-Lock of the outdoor flange on the outdoor speed dome. Aim the guide pin of mounting base at the longest curved chute of outdoor flange. Fix the speed dome on the outdoor flange. Tighten the screw as following. - Page 13 In the LAN socket, there are two LEDs embedded: LAN LED (green color) This LED will be flashing while network accessing via Ethernet. Power LED (orange color) This LED is used to indicate whether DC power is on or not. RS485 &...
-
Page 14: Ica-Hm130 Installation
Restore the device: a. Press the button down continuously. b. Hold the button at least 5 seconds and release it. Then the device has been restored to default settings and reboot again. 4. Power Jack The input power is DC 12V. 1. -
Page 15: Ica-Hm135 H.264 Mega-Pixel 20M Ir Vandal Proof Ip Dome
4. For lens adjustment, move the IP camera body (some model type’s limits the PCB board to 180° rotational adjustment) and set the focus by turning the lens to the left or right direction. When the IP camera focus adjustment has been completed, rotate the dome housing clockwise to secure it to the mounting base. - Page 16 In the LAN socket, there are two LEDs embedded: LAN LED (green color) This LED will be flashing while network accessing via Ethernet. Power LED (orange color) This LED is used to indicate whether DC power is on or not. RS485 &...
-
Page 17: Ica-Hm135 Installation
Restore the device: a. Press the button down continuously. b. Hold the button at least 5 seconds and release it. Then the device has been restored to default settings and reboot again. 4. Power Jack The input power is DC 12V. 1. - Page 18 2. Set the mounting base onto the wall or ceiling and center it over the mounting hole, using the supplied four retaining screws to secure the main body. 3. Set the proper image by moving the IP camera body (some model may limit the PCB board to 180°...
-
Page 19: Ica-Hm350 H.264 Mega-Pixel 30M Outdoor Ir Internet Camera
6. Connect the LAN cable to a switch or hub. When this switch/hub is a PoE device, you can ignore the next step. 7. Connect DC-Jack to the with the bundle power adapter power source. 8. Done. 2.6 ICA-HM350 H.264 Mega-Pixel 30M Outdoor IR Internet Camera 2.6.1 ICA-HM350 Package Content IP Camera Unit x 1 Power Adapter x 2... - Page 20 Power LED (orange color) This LED is used to indicate whether DC power is on or not. RS485 & DI/DO Video in MIC in Line out Camera Power Jack RJ45 Reset Button Heater Power Jack 2. RS-485: Connect to a local keyboard controller. DI/DO: Connect to sensor in and alarm out devices.
-
Page 21: Ica-Hm350 Installation
4. Power Jack The input power is DC 12V. ONLY use package power adapter supplied with the internet. Other- wise, the product may be damaged. Note 5. MIC in (audio in) Connect a microphone to the IP camera. 6. Line out (audio out) Connect a loud speaker to the IP camera. -
Page 22: Chapter 3. Camera Windows Utility
Camera is with the default settings. However to help you find the networked camera quickly the windows utility (PLANET IPWizard II) can search the IP cameras in the network that shall help you to configure some basic setting before you started advanced management and monitoring. - Page 23 LAN setting: The utility featured with “LAN” setting function to help user to modify the IP parameters of the installed network devices. User can step by step to setup IP address, username and password. 1. If no IP address is assigned within 30 seconds, the networked device will automatically assign 192.168.0.20.
-
Page 24: Further Information
If difficulty is met, please refer to the following steps to establish the connection: - The networked device must be installed and powered ON. If the networked device’s default IP Address (192.168.0.20) is already used by another device, the other device must be turned OFF until the device is allocated a new IP Address during configuration.
Need help?
Do you have a question about the ICO-HM230 and is the answer not in the manual?
Questions and answers