Manual Port Forwarding - Beward N 1000 Installation & User Manual

Built-in multi-zone motion detector

Hide thumbs Also See for N 1000:

Table of Contents

For instance, the WAN IP address is 77.108.73.169 and the HTTP port number is 10000. In

this case, you need to enter the following in the address field of your browser:

http://77.108.73.169:10000/.

To use several cameras, you need to specify a unique port number for each camera and

configure the forwarding.

6.3.2. Manual Port Forwarding

If your router does not support UPnP, you must manually configure your router to forward

the ports. For this example, we use Planet XRT-412 router (almost identical to D-Link DI-604) to

connect the IP camera.

For example, consider a scenario where you want to set up one camera to view the images

over the Internet. You need to configure your router and your IP camera so that it can be accessed

over the Internet as well as over your LAN.

IMPORTANT!

This type of connection requires a static public IP address. Usually ISP's provide a dynamic internal IP

address, which can be used only inside the LAN. Contact your ISP to determine your IP address.

For example, consider Internet and LAN connections are configured on your router. The

router is assigned a static public IP address provided by the ISP: 77.108.73.169.

The IP address range used on the local network is 192.168.0.1 – 192.168.0.255 and the

router's IP address is 192.168.0.1. For this example, we use a computer connected to this local

network.

It is necessary to configure the network settings of the camera (the camera's IP address is

192.168.0.99). To access the camera over the Internet, you need to configure its ports. On the

local network, we use the camera's IP address to access it. To access the camera settings and

view the images, the following default port numbers are used: HTTP port – 80, RTSP port – 554.

IMPORTANT!

When accessing over the Internet, you should note that all cameras inside the local network have the

same public IP address. To access the cameras through the same IP address, you must specify a unique

HTTP port number for each camera.

N1000 Installation User Manual

Chapter 6. Accessing the Camera over the Internet

Table of Contents