Table of Contents
Advertisement
more information on how to configure DDNS. The router is configured to work with DynDNS as
follows:
IMPORTANT!
Make sure your router supports DDNS, is connected to the Internet and configured properly.
Step 1: enter the IP address of your router in the browser address field. In the appeared
window, enter your username and your password. After successful authorization, the router
settings page appears. Click the [General Setup] (Pic. 6.26).
Step 2: click the [DDNS] in the opened menu. Click the [Enable] to enable the DDNS
option.
Step 3: according to the registration details that were specified at DynDNS server (see
paragraph
6.4.2,
"camera184.dyndns.org" in the [Domain Name], enter "camera184" in the [Account / E-Mail] and
"123456" in the [Password / Key] field (Pic. 6.27).
N1000 Installation User Manual
select
"www.dyndns.org"
6.4.3),
Chapter 6. Accessing the Camera over the Internet
Pic. 6.26
in
the
[Provider]
field.
Enter
58
Advertisement
Table of Contents
