Table of Contents
Advertisement
IMPORTANT!
For detailed information on how to configure the camera through the web interface, please refer to the
Operations user manual.
According to the registration details that were specified at DynDNS server (see
6.4.2, 6.4.3), select "www.dyndns.org" in the [Server name] field. Enter "camera184" in the [User
ID] and "123456" in the [Password]. Enter "camera184.dyndns.org" in the [Host name] (Pic.
6.25).
Step 7: click [OK] to save the changes.
IMPORTANT!
After you configure the network settings, you must reboot the camera.
IMPORTANT!
If a host is not updated within 35 days, it will be removed from the system.
Step 8: the camera configuration is completed.
Let's consider an example of setting up DDNS on a router by configuring Planet XRT-401D.
Routers of other manufacturers are configured identically; please refer to the router's manual for
N1000 Installation User Manual
Chapter 6. Accessing the Camera over the Internet
Pic. 6.25
paragraph
57
Advertisement
Table of Contents
