Table of Contents
Advertisement
The window opens displaying information about the network connection settings. There are
two ways to configure the IP address:
Obtain an IP address automatically: select this option to obtain an IP address
automatically from a DHCP server on your network (Pic. 5.6). If an IP address is automatically
assigned to your computer, go to
Use the following IP address: an IP address is manually specified (Pic. 5.7).
N1000 Installation User Manual
Chapter 5. Setting Up the Wired Connection for Windows 7
paragraph 5.1.1
to define the network parameters.
Pic. 5.6
Pic. 5.7
15
Advertisement
Table of Contents
