Table of Contents
Advertisement
Step 8: repeat to create a forwarding rule for other cameras (Pic. 6.11).
The router configuration is complete.
IMPORTANT!
You can use the virtual server to map the HTTP ports (for example, the port 80 of the camera 1 is
translated to 8080; the port 80 of the camera 2 is translated to 8081). However, you must specify a unique
RTSP port number for each camera, which can be mapped to the same port (for example, the port 10000
of the camera 1 is translated to 10000; the port 10001 of the camera 2 is translated to 10001).
To access the camera over the Internet, use the IP address provided by your ISP (IP
address of the router's WAN port) and a certain HTTP port number.
For instance, the WAN IP address is 77.108.73.169 and the HTTP port number is 8081. In
this case, you need to enter the following in the address field of your browser:
http://77.108.73.169:8081/.
N1000 Installation User Manual
Chapter 6. Accessing the Camera over the Internet
Pic. 6.10
Pic. 6.11
47
Advertisement
Table of Contents
