Table of Contents
Advertisement
To configure the network settings through the web interface, go to SETTING – Basic –
Network. The [Network] section is divided into several subsections (Pic. 5.29).
The [Information] subsection provides options for configuring the general network settings
(Pic. 5.30).
You must specify the IP address and the other network parameters of the camera so it is on
the same subnet as the other network devices (Pic. 5.31).
N1000 Installation User Manual
Chapter 5. Setting Up the Wired Connection for Windows 7
Pic. 5.29
Pic. 5.30
30
Advertisement
Table of Contents
