Attaching The Wlan Module To The Module Carrier; Screwing The Smartcard Reader Onto The Module Holder - Fujitsu Esprimo E5 Series Operating Manual

System expansions

Attaching the WLAN module to the module carrier

a

Screwing the SmartCard reader onto the module holder

2
46
2
a
1
2
a
1
a
► With the component side facing downwards,
slide the WLAN module in the direction
of the arrow (1) into the guide on
the module holder (a).
► Fasten the WLAN module in place
with the screw (2).
► Push the SmartCard reader - with the
component side facing downwards - into
the guide on the module holder (a) in
the direction of the arrow (1).
► Secure the SmartCard reader with
the screws (2).
Fujitsu