Installing/Removing A Smartcard Reader And/Or Wlan Module (Optional) - Fujitsu ESPRIMO E Operating Manual

Installing/removing a SmartCard reader and/or WLAN
module (optional)
You can also install a SmartCard reader and/or a WLAN module for wireless LAN (Local Area
Network) in place of the drive in the installation bay of the floppy disk drive.
The SmartCard reader and WLAN module can be installed together in the carrier.
i
However, you can also install only one of the two boards. The WLAN module is installed in
the lower slot of the carrier and the SmartCard reader in the upper slot of the carrier. If you
want to install the SmartCard reader and the WLAN module together, first install the WLAN
module. Removal is carried out in the reverse order.
Screwing WLAN module onto carrier
Screwing SmartCard reader onto carrier
A26361-K690-Z220-1-7619, edition 1
2
2
a
1
a
2
2
a
1
a
► Push the WLAN module - with the
component side facing downwards - in the
direction of the arrow (1) into the guide (a).
► Fasten the WLAN module with the
screws (2).
► Push the SmartCard reader - with the
component side facing downwards - in the
direction of the arrow (1) into the guide (a).
► Fasten the SmartCard reader with the
screws (2).
System expansions
67