No Mouse Pointer Displayed On The Screen; Time And/Or Date Is Not Correct - Fujitsu Esprimo E5 Series Operating Manual

Cause
Monitor cable not connected
Incorrect setting for the monitor

No mouse pointer displayed on the screen

Cause
The mouse is not correctly connected.
The mouse controller is not enabled.

Time and/or date is not correct

Cause
Time and date are incorrect.
The lithium battery is discharged.
Fujitsu
Problem solutions and tips
Remedy
► Switch off the monitor and the device.
► Check that the monitor cable is properly
connected to the device and monitor.
► Switch on the monitor and the device.
► Restart the system.
► Press F8 while the system is booting.
► Start the system in Safe Mode.
► Set up the monitor as described in the
documentation for your operating system
and monitor.
Remedy
► Shut down the operating system properly.
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Switch the device on.
► Check in the BIOS-Setup whether the mouse
controller is enabled.
► Check that the mouse driver is properly
installed and is present when the application
programme is started. Detailed information
can be found in the user guide for the mouse
and application programme.
Remedy
► Set the correct time and date within the
operating system you are using.
or
► Set the correct time and/or date in the
BIOS Setup.
► If the time and date are repeatedly wrong
when you switch on your device, replace the
lithium battery (see
battery", Page 65).
"Replacing the lithium
33