Operation; Switch The Device On; Switching On A Device When The Lithium Battery Is Discharged (0-Watt Devices) - Fujitsu Esprimo E5 Series Operating Manual

Operation

Switch the device on

► If necessary, switch the monitor on (see the operating manual for the monitor).
Device, Monitor,
► Switch on the device using the main power switch located on the rear of the device (if present).
► Press the ON/OFF switch on the front of the device.
The power indicator glows and the device starts.
Switching on a device when the lithium battery
is discharged (0-Watt devices)
A 0-Watt device consumes no current when it is switched off and in the quiescent state.
Your 0-Watt device is equipped with an emergency on button (primary resume button) which can be
used if it can no longer be started, for instance because the lithium battery is discharged.
After the emergency on button (1) has been pressed for a short time, the device can be
switched on again using the ON/OFF switch at the front of the device.
► Press the emergency on button (1) to start the device.
Fujitsu
1
Operation
23