Installing And Removing The Accessible 5; Inch Drive; Fitting The Drive Cover For The 5 Inch Drive - Fujitsu Esprimo E5 Series Operating Manual

Installing and removing the accessible 5

Fitting the drive cover for the 5
In order to use the locking function for the accessible 5
must be fitted to the drive before the drive is installed in the casing. Proceed as follows:
The drive cover can be found either on the drive place holder or on the installed drive.
► Remove the casing cover (see Chapter
► Remove the accessible drive or the drive place holder (see
an accessible drive", Page
► Release the drive cover in the direction of the arrow (1) from the drive/drive
placeholder that was removed.
Fujitsu
1
"Removing the casing cover", Page
44).
1
► Attach the drive cover onto the drive/drive
1
/

inch drive

4
/ drive, the corresponding drive cover
1
4
"Removing
place holder to be fitted (1).
System expansions
/ inch drive
1
4
37).
41