Install the M.2 module on the front panel module (optional)
► Open the casing (see
► Remove the front panel module (see
► Insert the M.2 module (b) at a slight angle in the direction of the arrow (1)
into the slot (a) on the front panel module.
► If the screw for retaining the M.2 module is located on one of the associated stud
bolts on the front panel module, remove the screw.
► Secure the M.2 module on the front panel module with the screw (2). In doing so,
select the stud bolt appropriate to the length of the module.
► Install the front panel module (see
► Close the casing (see
If necessary, you must adjust the entry for the M.2 module accordingly in the BIOS Setup.
Fujitsu
"Open the casing", Page
"Removing the front panel module", Page
"Installing the front panel module", Page
"Close the casing", Page
43).
a
44).
System expansions
51).
2
1
b
53).
83