Programme Mode Features; P R O G R A M M E M O D E T Ab L E - Eaglemaster E2 Instruction Manual

Programme mode features:

Many of the operating settings of this unit are programmable. The programmable mode setting
dictates how the unit operates.
To enter programme mode and access Feature Change:
1. Disarmed the system, turn ignition from ON to OFF, within 10 seconds press valet Switch
ON-OFF for 8 times.
2. Siren will 2 long chirps sound and LED indicator ON to confirm the system is in programme
mode.
3. Under the programming mode (Features table may referring the following chart) ., Suppose
to set the function #5 :
press the (remote button for 5times) , Led will indicate flashing 5 times then pause per
cycle ., then you may press the
siren 1 chirp , or press again the button
to set Item No.#10, press remote button
10time then pause per cycle (The quantity of led flashes is according to the numbers of
pressed Button
Press the button
*Exit programme mode: Under programming mode, if turning Ignition to ON , the system will
exit the programming mode and siren will give two chirps .
Note: if item No: 11 has been programmed, the system will auto exit the mode by given 2 chirps.

P R O G R A M M E M O D E T AB L E

Press button
Item NO by LED flash
1
Ignition on safety door lock
2
Passive arming & door lock
3
Passive immobilizer
4
Channel-2 output feature
5
Channel-3
6
Channel-4
7
Arm/Disarm chirp ON/OFF
8
Door unlock 1& 2 pulse
9
Door switch Anti car-jack
10
2-Way remote Check in-Range
11
Factory default setting
W/I : means with the feature
Note: means factory default setting before delivery.
(remote Button
), then Press the Button
again to disable the feature, siren 2chirp. , and so on ..
FEATURES
output feature
output feature
W/O : means without the feature
to selected the feature#5 enable
to disable the feature siren 2chirp. Again, If want
for another 5times more then LED will indication
to enable the feature #10 siren 1 chirp or
Press once
1-chirp
*W/I
*W/O
W/I
*2nd-killer
*Trunk open
*Window
*ON
*1pulse
*W/O
W/I
Press button
chirp and all features back to factory default.
-12-
Press twice
Press
2-chirp 3-chirp
W/O
W/I
W/I
Without door lock With door lock
*W/O
Turbo
Dome Light
2nd stage
Turbo
Unlock
Horn
Turbo
OFF
2pulse
W/I
*W/O
once, siren give 1 long
3 times