Network Technologies ST-2U Installation & User Manual page 6

2-port universal kvm switch

Hide thumbs Also See for ST-2U:

Table of Contents

•

SUN-

lug the SUN keyboard directly into the USER port.

Fig. 9

For each CPU connect the appropriate NTI input device and video cables to the proper ports on the ST-2U switch using the methods

detailed below.

NOTE: Make sure the cables from a single CPU are connected to the NTI ST-2U at a keyboard port and a video port with the same

number. Otherwise, the commands typed to one CPU may show up on the monitor intended for another CPU.

•

PS/2- Attach a VKTINT-xx-MM cable between the keyboard and mouse ports of the CPU and a DEVx port on the ST-2U switch.

(See Fig. 10.) (Ensure that the green 6 pin miniDIN mouse connector is in the mouse port on the CPU and that the purple 6 pin miniDIN

keyboard connector is in the keyboard port on the CPU.)

Attach a VEXT-xx-MM cable between the video port on the CPU and a CPUx port on the ST-2U switch.

Fig. 10

Table of Contents