Installing And Removing The Front Usb Board - Fujitsu Siemens Computers SCENIC D Operating Manual

System expansions

Installing and removing the front USB board

You can install a USB board in the casing with two USB ports accessible from the front. This USB
board is optionally available.
Attaching the USB board to the USB bracket
Removing the USB board from the USB bracket
56
1
1
Installing and removing the front USB board
Ê
Place the USB board on the USB bracket.
Ê
Fasten the USD board into place with the
screws (1).
Ê
Loosen the screws (1).
Ê
Remove the USB board from the USB
bracket.
A26361-K636-Z100-9-7619