System expansions
Installing or removing the hard disk drive
►
Open the casing (see "Opening the casing" section).
Removing the cover
►
Loosen the screw (1).
►
Fold out the cover (2).
Installing a hard disk drive
►
Take the new hard disk drive out of its packaging.
►
Make the required settings (e.g. master-slave settings or SCSI-ID) on the drive.
54
1
2
►
Secure the EasyChange rails on the side of the
hard disk by inserting the upper pins of the
EasyChange rail in the corresponding holes of the
hard disk.
A26361-K665-Z125-1-7619, Edition 1