►
Press the EasyChange rails into the provided holes.
►
Slide the floppy disk slide-in module into the casing (1) until it engages noticeably. Fit the data
and power supply connectors to the floppy disk drive.
►
Connect the USB cable and, if necessary, the audio cable to the corresponding connector on
the mainboard (see also the technical manual for the mainboard).
►
Attach the front panel (see "Attaching the front panel" section).
►
Close the casing (see "Closing the casing" section).
A26361-K665-Z125-1-7619, Edition 1
System expansions
63