Low-Profile Boards; Mounting Slot Adapter; Removing Slot Adapter - Fujitsu Siemens Computers CELSIUS M Operating Manual

Low-Profile boards

For units with a particularly low overall height, there are so-called low-profile boards with a slot cover
with a lower overall height to match the low-profile units. To also install these low-profile boards in
normal board slots, you must mount a corresponding slot adapter beforehand
Two-piece rear covers are fitted into the slots intended for low-profile boards. The two pieces are
connected together with a screw.
► Remove the desired rear cover and then remove the screw.

Mounting slot adapter

1
2

Removing slot adapter

2
1
A26361-K665-Z125-1-7619, Edition 1
► Fit the slot adapter on the slot cover of the
low-profile board (1) and screw it on (2).
Now you can install the low-profile board in a
suitable slot like a normal board (see the
"Installing a board" section).
► Unscrew the screw (1) and remove the slot
adapter (2).
System expansions
43