►
Press the EasyChange rails into the provided holes.
►
Slide the floppy disk slide-in module into the casing (1) until it engages noticeably.
►
Fit the data and power supply connectors to the floppy disk drive.
►
If it is present, pull the cable of the front USB or USB-audio interface from the mainboard (see
also the technical manual for the mainboard).
►
Attach the front panel (see "Attaching the front panel" section).
►
Close the casing (see "Closing the casing" section).
It may be necessary to modify the entry for the drive in the BIOS Setup.
i
A26361-K665-Z125-1-7619, Edition 1
System expansions
53