Table of Contents
Advertisement
Operation
Indicators on the workstation
The indicators are on the front of the workstation. Which indicators are available on your workstation
depends on the configuration level you have selected.
1 = LCD
2 = CD-ROM indicator
1 - LCD
The LCD lights up as soon as the workstation is switched on. Up to seven symbols are displayed,
depending on the operating state.
Power on
appears on the LCD as soon as the workstation is switched on.
Standby/ Energy saving mode
appears on the LCD as soon as the workstation is in energy saving mode. The
workstation can be switched on with the ON/OFF switch.
Hard disk
appears on the LCD as soon as the hard disk is accessed.
X
Error
appears on the LCD if there is a hardware error in the workstation or if a critical
hardware state is reached (e.g. fan failure, high temperature). You can use
DeskView to get detailed information on the problem that occurred. If in any doubt,
consult your administrator.
LAN connection
appears on the LCD as soon as the workstation is connected to a LAN.
20
1
2
3
3 = Floppy disk indicator
A26361-K665-Z125-1-7619, Edition 1
Advertisement
Table of Contents
