Table of Contents
Advertisement
System expansions
Opening the casing
►
Switch off the workstation. The workstation must not be in the energy-saving mode.
Please take note of the safety information in the "Important notes" chapter.
!
Pull the power plug out of the mains outlet.
Only insert the power plug after you have closed the casing.
►
Remove any connected cables in the unit that obstruct you.
►
Place the device in a convenient working position.
Depending on the configuration level, your workstation will be supplied with or without a casing lock.
►
If necessary, unlock the casing.
►
Press the green unlocking button on the rear of the casing (1).
►
Hold the green unlocking button depressed and slide the casing side cover upwards in the
direction of the arrow (2).
►
Pull the side cover out of the casing.
34
1
2
A26361-K665-Z125-1-7619, Edition 1
Advertisement
Table of Contents
