System expansions
a
►
Push the slot cover into the slot (1).
Ensure that the projection (a) on the slot cover engages into the appropriate recess. If it
!
does not, you will find it difficult to close the locking rail. There is a danger of damage.
►
Close the locking rail (2) and press on the locking mechanism in the direction of the arrow. The
word "PUSH" is embossed on the locking mechanism.
For workstations with a fan only:
►
Install the fan (see "Installing the fan").
►
Close the casing (see "Closing the casing" section).
If you have installed or removed a PCI board, please check the relevant PCI slot settings
i
in the BIOS Setup. If necessary, change the settings. Further information is provided in the
PCI board documentation.
42
1
2
A26361-K665-Z125-1-7619, Edition 1