Fujitsu Siemens Computers CELSIUS M Operating Manual page 48

System expansions
► Make the required settings for the board.
1
► Push the board up to its slot (1).
► Press the board into the slot so that it engages.
► If necessary, connect the cables.
► Close the locking rail (2) and press on the locking mechanism in the direction of the arrow. The
word "PUSH" is embossed on the locking mechanism.
For workstations with a fan only:
► Install the fan (see "Installing the fan").
► Close the casing (see "Closing the casing" section).
If you have installed or removed a PCI board, please check the relevant PCI slot settings in
i
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The slots 1, 3, 5 and 7 are suitable for low-profile cards with an adapter. The slots are
counted from the bottom to the top.
40
2
A26361-K665-Z125-1-7619, Edition 1