Replacing The Smartcard Reader - Fujitsu Siemens Computers CELSIUS M Operating Manual

System expansions

Replacing the SmartCard reader

Removing a SmartCard reader
► Open the casing (see "Opening the casing" section).
► Remove the front (see "Removing the front panel" section).
► Disconnect the plug of the SmartCard data cable from the mainboard (see also the technical
manual for the mainboard).
► Loosen the screws (1).
► Pull the SmartCard reader, together with its mounting, out of the casing (2).
If you remove the upper accessible drive first, you will find it easier to remove the
i
SmartCard reader together with its mounting.
2
58
1
2
► Remove the data cable from the SmartCard
reader.
► Undo the screws (1) and pull the SmartCard
reader out of the carrier (2).
A26361-K665-Z125-1-7619, Edition 1
1