2.6
CPU Board Installation
After setting the jumpers and installing memory modules and CPUs, install the
CPU board into the CPU board slot on the system board.
Follow these steps to install the CPU board:
1. Position the CPU board over the slot on the system board such that the
component side (CPU side) faces upward.
2. Gently insert the edge connectors of the board into the slot.
Figure 2-16 Installing the CPU Board
Make sure that the CPU board is properly
seated in the slot.
If you install or use one processor, you must
use or install a terminator board into slot 2
(sl2).
Chapter 2 - CPU Board 2-19