System Error Messages - Acer Altos 9100B User Manual

Table 1-4

System Error Messages

Message
CMOS Battery Error
CMOS Checksum Error
Display Card Mismatch
Diskette Drive Controller
Error or Not Installed
Diskette Drive Error
Diskette Drive A Type
Mismatch
Diskette Drive B Type
Mismatch
Equipment Configuration
Error
Hard disk Controller Error
Hard disk 0 Error
Hard disk 1 Error
Keyboard Error or No
Keyboard Connected
Keyboard Interface Error
Action
Replace the RTC chip or
contact your dealer.
Check the RTC chip and the
necessary jumper. If the
battery is still good, run
Setup.
Run Setup (see section 3.1).
Check and connect the
control cable to the diskette
controller.
Diskette may be defective. If
not, replace the diskette drive.
Run Setup (see section 3.1)
and select the proper drive
type.
Run Setup (see section 3.1)
and select the proper drive
type.
Modify the memory
configuration to agree with
one of the options in Table 2-
3 or 2-4.
Run Setup (see section 3.1).
Check all cable connections.
Replace hard disk.
Check all cable connections.
Replace hard disk.
Check and connect the
keyboard to the system unit.
Replace the keyboard or
contact your dealer.
Chapter 1 – System Board 1-19