3.7.4
Non-PnP ISA Device Configuration
This parameter reserves the use of resource addresses for non-PnP ISA devices.
Whenever a parameter is set to Yes, that address is reserved for an ISA card only.
The system will not allocate this address to any PCI or PnP cards.
When set to No, the system will allocate these resource addresses to PCI or PnP
cards.
This section consists of four pages:
3-34
AcerAltos 9100B Series User's Guide
When installing a non-PnP ISA device, you
have to determine which resource address to
use.