Installing A Pentium Ii Processor; Matching The Fan-Heatsink Clips With The Holes On The Processor - Acer Altos 9100B User Manual

2.4

Installing a Pentium II Processor

The Pentium II processor module comes with holes on one side to hold the clips
of the heatsink and fan. The upper set of holes (near the latches) on the processor
are wider and should match the wider ends of the clips on the heatsink. The
lower set of holes are smaller and should match the narrow ends of the heatsink
clips.
Figure 2-5 Matching the Fan-Heatsink Clips with the Holes on the Processor
2-10 AcerAltos 9100B Series User's Guide
You must install the heatsink and fan before
you install the processor module into the
socket on the CPU board.
Wide Holes
Narrow Holes
Wide Clip Ends