Acer Altos 9100B User Manual page 135

Configuration
SCSI Bus Interface Definitions
Additional Options
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 5-2 Configure/View Host Adapter Settings Screen (2 of 2)
Use the cursor ( ↑ ↓ ) to move to your selection. Press Enter to display a pop-up
menu of choices or to make selections. Press Esc at any time to return to the
previous menu.
AcerAltos 9100B Series User's Guide
5-6
Adaptec AIC7880 Ultra/Ultra W
AIC-7880 Ultra/Ultra W at Bus:Device 01:06h
Host Adapter SCSI ID ................................... 7
SCSI Parity Checking.................................... Enabled
Host Adapter SCSI Termination.................... Disabled
Boot Device Options...................................... Press <Enter>
SCSI Device Configuration............................ Press <Enter>
Advanced Configuration Options................... Press <Enter>
<F6> - Reset to Host Adapter Defaults
Host Adapter SCSI Termination settings:
Disabled for the first Adaptec AIC-7880
st
onboard (1 channel)
Enabled for the second Adaptec AIC-7880
nd
onboard (2 channel)
Press F6 to reset all settings to the SCSI
controller defaults. SCSI controller default
settings are marked with an asterisk (*)
throughout the selection submenus.
SCSISelect (TM) Utility
*
=default)