Table of Contents
Advertisement
3.6.2
Silent Boot
This parameter enables or disables the Silent Boot function. When set to Enabled,
BIOS is in graphical mode and displays only an identification logo during POST
and while booting, after which the screen displays the operating system prompt
(such as DOS) or logo (such as Windows 95). If any error occurred while booting,
the system automatically switches to the text mode.
Even if your setting is Enabled, you may also switch to the text mode while
booting by pressing
keyboard.
When set to Disabled, BIOS is in the conventional text mode where you see the
system initialization details on the screen.
3.6.3
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon booting. The
default setting is Enabled.
3.6.4
Memory Test
When set to Enabled, this parameter allows the system to perform a RAM test
during the POST routine. When set to Disabled, the system detects only the
memory size and bypasses the test routine. The default setting is Disabled .
3.6.5
Initialize SCSI Before IDE
Enabling this parameter allows SCSI devices installed in the system to be
initialized before IDE devices. You may enable this parameter if you have a SCSI
boot drive.
When this parameter is disabled, the IDE drives are normally
initialized first during POST.
after you hear a beep that indicates the activation of the
Chapter 3 - BIOS Utility 3-19
Advertisement
Chapters
Table of Contents
