A.5
SCSI Channel Configurations
You may configure the backplane as single-channel (combine) or dual-channel
(split) controller.
A.5.1 Single-Channel Configuration
In a single-channel configuration, channel 1 supports the SCSI devices plugged
into slots 1 to 8. Set the channel configuration switches to "Combine" and set the
terminators accordingly (Table A-1) to achieve a single-channel configuration.
See Figure A-1 for the locations of the switches and terminators.
Connect to
Wide SCSI
connectors
Figure A-6
Table A-1 lists the terminator settings for the single-channel configuration.
Single-Channel Configuration
Appendix A - Drive Tray Management System
Connect SCSI
channel 1 to slots
1 to 8
A-7