Remote Diagnostic Configuration; Load Setup Default Settings - Acer Altos 9100B User Manual

3.10 Remote Diagnostic Configuration

The Remote Diagnostic Configuration parameters allow you to configure your
RDM settings. Refer to the RDM User's Guide for information on RDM.

3.11 Load Setup Default Settings

Use this option to load the default settings for the optimized system
configuration. When you load the default settings, some of the parameters are
grayed-out with their fixed settings.
configurable.
The following dialog box appears when you select Load Setup Default Settings
from the main menu.
Do you want to load default settings?
Select Yes to load the default settings.
Select No to ignore the message and return to the BIOS utility.
3-44 AcerAltos 9100B Series User's Guide
Most of the Remote Diagnostic Configuration
parameters turn gray and non-configurable
when there is no RDM module installed in the
system.
[Yes] [No]
If you repeatedly
messages, the battery may be bad. In this
case, the system cannot retain configuration
values in CMOS. Ask a qualified technician
for assistance.
These grayed parameters are not user-
receive Run Setup