Table of Contents
Advertisement
1.6
CPU Installation
The system board comes with a zero-insertion force (ZIF) CPU socket
for easy installation.
Follow these steps to install a Pentium CPU:
1.
Lift up the socket lever.
2.
Insert the CPU to the socket. Make sure that the notched corner
of the CPU matches the pin 1 indicator on the socket.
Be careful not to bend any pins.
3.
Pull down the socket lever.
Figure 1-11
Installing a Pentium CPU
4.
Set jumpers JP8, JP14, and JP18 according to the CPU speed,
JP12 for the correct CPU type, and JP13 for the appropriate CPU
voltage. Refer to Table 1-1 for the jumper settings.
System Board
1-15
Hide quick links:
Advertisement
Table of Contents
