Dolby Digital Out; Dts Out; Linear Pcm Out - Pioneer DV-565A Operating Instructions Manual

Initial Settings menu

Dolby Digital Out

You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
• Default setting: Dolby Digital
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language

DTS Out

Display

Linear PCM Out

Options MPEG Out
Speakers
If your AV receiver (or other connected
component) is Dolby Digital compatible, set
to Dolby Digital, otherwise set to Dolby
Digital > PCM.
• When set to Dolby Digital > PCM, the
Audio Output Mode on page 66 must be
set to 2 Channel to hear any sound from
the digital output.
DTS Out
You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
• Default setting: DTS
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display Linear PCM Out
Options MPEG Out
Speakers
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to DTS > PCM (DTS
audio is converted to more compatible PCM
audio). Check the manual that came with the
other component if you're unsure whether it is
DTS compatible.
Dolby Digital
Dolby Digital > PCM
• If you set to DTS with a non-DTS
• If you've selected DTS > PCM, you can
• When set to DTS > PCM, the Audio Output
Linear PCM Out
You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
• Default setting: Down Sample On
DTS
DTS > PCM
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96 kHz), set this to Down
Sample Off, otherwise set it to Down
Sample On (96 kHz audio is converted to a
more compatible 48 kHz). Check the manual
that came with the other component if you're
unsure whether it is 96 kHz compatible.
compatible amplifier, noise will be output
when you play a DTS disc.
choose how the signal is downmixed to
PCM audio. See DTS DownMix on page 65
to change the downmix setting.
Mode on page 66 must be set to 2
Channel to hear any sound from the
digital output.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display Linear PCM Out
Options MPEG Out
Speakers
09
Down Sample On
Down Sample Off
55
En