Looping A Section Of A Disc; Using Repeat Play - Pioneer DV-565A Operating Instructions Manual

Playing discs
• When changing direction with a DVD-
Video disc, the picture may 'move' in an
unexpected way. This is not a
malfunction.

Looping a section of a disc

The A-B Repeat function allows you to specify
two points (A and B) within a track (DVD-
Audio, CD, SACD and Video CD) or title (DVD-
Video and DVD-RW) that form a loop which is
played over and over.
• You can't use A-B Repeat with MP3 discs,
Video CD in PBC mode, or unfinalized CD-
R/RW discs.
1 During playback, press PLAY MODE
and select 'A-B Repeat' from the list of
functions on the left.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
2 Press ENTER on 'A(Start Point)' to set
the loop start point.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
3 Press ENTER on 'B(End Point)' to set
the loop end point.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
After pressing ENTER, playback jumps back
to the start point and plays the loop.
• The minimum loop time is 2 seconds.
4 To resume normal playback, select
'Off' from the menu.

Using repeat play

There are various repeat play options,
depending on the kind of disc loaded. It's also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating a program list
on page 40).
• You can't use Repeat play with Video CD/
Super VCDs in PBC mode, or unfinalized
CD-R/RW discs.
1 During playback, press PLAY MODE
and select 'Repeat' from the list of
functions on the left.
Play Mode
A-B Repeat Title Repeat
Repeat Chapter Repeat
Random Repeat Off
Program
Search Mode
05
37
En