Setting The Tv System - Pioneer DV-565A Operating Instructions Manual

Additional information
Set to 4:3 (Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don't
actually see the whole picture.
Please note that many widescreen discs
override the player's settings so that the disc
is shown in letter box format regardless of the
setting.
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3
settings with a widescreen TV, will result
in a distorted picture.

Setting the TV System

The default setting of this player is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you experience picture
distortion with some discs, set the TV system
to match your country or region's system.
Doing this, however, may restrict the kinds of
disc you can watch. The table below shows
what kinds of disc are compatible with each
setting (AUTO, PAL and NTSC).
If the player is on, press  STANDBY/
1
ON to switch it to standby.
2 Using the front panel controls, hold
down  then press  STANDBY/ON
to switch the TV system.
The TV system changes as follows:
AUTO  NTSC
NTSC  PAL
PAL  AUTO
The player's display shows the new setting.
• You have to switch the player into standby
(press  STANDBY/ON) before each
change.
D i s c P l a y e r s e t t i n g
Type Format NTSC
DVD / NTSC
NTSC
Super VCD PAL NTSC
Video CD NTSC NTSC
PAL NTSC
CD / no disc ––
NTSC
PAL AUTO
MOD.PAL NTSC
PAL PAL
MOD.PAL NTSC
PAL PAL
PAL NTSC or PAL
10
73
En