Connecting For Multichannel Surround Sound; Connecting Using The Multichannel Analog Outputs - Pioneer DV-565A Operating Instructions Manual

02 Connecting up
• Use a SCART cable (not supplied) to
connect the AV CONNECTOR 2 to an AV
output on the VCR, SET TOP BOX etc.
SCART
AV CONNECTOR 2
The AV CONNECTOR 2 only outputs
composite video.
• SCART cables are available in several
configurations. Make sure that the one
you get will work with this player and your
TV/monitor. You can find the pin
assignments on page 85.
Connecting for multichannel
surround sound
You can connect this player to your AV
receiver using the multichannel analog
outputs or one of the digital outputs.
In addition to these connections, you should
also connect the 2 channel analog outputs for
compatibility with all discs.
You'll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
16
En
VCR or SET TOP BOX etc.
DIGIT
CONTROL AUDI
IN OUT
AV CONNECTOR 1(RGB) - TV/AV Receiver
Connecting using the
multichannel analog outputs
If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this player
to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all
kinds of disc, including Dolby Digital and DTS
DVD-Video discs, as well as high sampling
rate and multichannel DVD-Audio and SACD
discs.
1 Connect the MULTICHANNEL AUDIO
outputs on this player to the multi-
channel audio inputs on your AV receiver.
It's convenient to use three stereo audio
cables; one for the FRONT, one for the
SURROUND and one for the CENTER and
SUBWOOFER channels.
AV receiver
AUDIO OUT(2CH)
Y P
B L
CENTER
L
AUDIO OUT(5.1CH)
R
R
P
FRONT SURROND SUB
R
VIDEO OUT
WOOFER
COMPONENT VIDEO OUT
MULTI-
CH. INPUTS