Table of Contents
Advertisement
The lnltlal Settings Menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD player,
including audio, and video output settings,
audience limitation settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This
is usually because a disc is playing. Stop the
disc, then change the setting.
1
Press SETUP and select 'Initial Set-
tings' from the on-screen display.
2
Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3
Make the setting you want.
Note
The language options shown in the on-
l
screen display illustrations on the
following pages may not correspond to
those available in your country or
region.
Digital Audio Out settings
Digital Out
Default setting: On
l
You only need to make this setting ifyou
connected this system to an AV receiver (or
other component) using one of the digital
Dolby Digilal Out
DTS Out
Options
MPEG Out
If at any time you need to switch off the
digital audio output, set this to Off, other-
wise leave it On.
Note that you can't switch on/off the optical
and coaxial outputs individually.
Dolby Digital Out
Default setting: Dolby Digital
l
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) is Dolby Digital compatible, set
to Dolby Digital, otherwise set to Dolby
Digital > PCM.
. . :. I
Er
Advertisement
Table of Contents
