The Initial Settings Menu; Using The Initial Settings Menu; Digital Audio Out Settings; Digital Out - Pioneer DV-C505 Operating Instructions Manual

D _The Initial Settings Menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD player,
including audio, and video output settings,
audience limitation settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This
is usually because a disc is playing. Stop the
disc, then change the setting.
1 Press SETUP and select'Initial Set-
tings" from the on-screen display.
Digital Audio Out settings
Digital Out
• Default setting: On
You only need to make this setting if you
connected this system to an AV receiver (or
other component), using one of the digital
outputs.
Initial Settings
{ Digital Audio Out
Video Output
Language
Display
Options
I_ Initial Settings
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
D Note
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or
region.
If at any time you need to switch off the
digita audio output, set this to Off. other-
wise leave it On.
Note that you can't switch oP../offthe optical
and coaxial outputs individually.
Dolby Digital Out
• Default setting: Dolby Digital
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
initial Settings
1Digital Audio Out
Video Output
Language
Display
Options
J
Digital Out
D01by Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
If your AV receiver (or other connected
component) is Dolby Digital compatible, set
to Dolby Digital, otherwise set to Dolby
Digital > PCM.
En