Output Mode For Machine Without Finisher - Konica Minolta 7145 Instruction Manual

Output Mode for Machine without Finisher

This section describes the output modes for the
copier without a Finisher.
The Stack mode is initially selected.
1 Stack mode copies the original set in amounts
determined by the print quantity setting, then
outputs sorted sets normally.
2 E-SORT+Sort mode rotates every other set by
90° upon exit, provided the same paper size is
loaded in two trays, one tray with paper loaded
in portrait orientation and the other tray with
paper loaded in landscape orientation, e.g., A4 and A4R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 E-SORT+Group mode rotates every other grouped set by 90° upon exit, provided
the same paper size is loaded in two trays, one tray with paper loaded in portrait
orientation and the other tray with paper loaded in landscape orientation, e.g., A4
and A4R.
Specifications for Output Modes without Finisher
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet, OHP
Interleave, Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp
(Numbering)
❒ Incompatible with E-SORT+Sort mode: Mixed Original, Sheet/Cover Insertion,
Booklet, OHP Interleave, Non-Image Area Erase, Repeat, AUTO Layout
❒ Incompatible with E-SORT+Group mode: Using platen glass (unless Chapter with
Platen store mode, Image Shift, Flip Side 2, or Stamp (excluding Numbering) is
used), Proof Copy, Mixed Original, Sheet/Cover Insertion, Booklet, OHP Interleave,
Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp (Numbering)
Stack (default)
3-32
Originals
3
2
1
E-SORT+Sort
Example:
3-set copies
Group E-SORT+Group