Preset Key; Density - Konica Minolta 7145 Instruction Manual

[3] Preset Key

Set two userset density levels and three USERSETs of magnification.

[1] Density

Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USERSET 1.
The programmed copy density can be recalled by selecting USERSET 1 on the Basic
Screen.
Preset Key Setting Menu Screen
Procedure
1 Touch 3. Preset key on the System/Copier Setting Menu Screen to display the Preset
Key Setting Menu Screen.
2 Touch 1. Density to display the Userset Density Selection Screen.
3 Place the original on the platen glass or in the RADF.
4 Touch ON to highlight it. The USERSET key will be displayd on the Basic Screen when
restored.
5 Touch Userset1 or Userset2. The Userset Density Darker Setting Screen will be displayed.
6 To program Userset (1 or 2) to a darker
level, perform the following operation,
then proceed to step 7.
(1) Touch the desired number key to
select the density level. If the darker
level sample sheet is desired, touch
No.1 1~4, No.2 5~8, No.3 9~12, or
No.4 13~16, then press [START].
(2) Select the desired darker exposure
from the sample sheet(s), then
touch the density number from 1 to
16.
To program Userset (1 or 2) to a lighter
level, perform the following operation,
then proceed to step 7.
(1) Touch Lighter to display the
Userset Density Lighter Setting
Screen.
(2) Touch the desired number key to
select the density level. If the lighter
level sample sheet is desired, touch No.1 1~4, No.2 5~8, No.3 9~12, or No.4 13~16,
then press [START].
(3) Select the desired lighter exposure from the sample sheet(s), then touch the density
number from 1 to 16.
7 Touch OK to complete the setting and return to the Preset Key Setting Menu Screen.
8 Touch RETURN to restore the System/Copier Setting Menu Screen.
9 If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
13-16
Userset Density Selection Screen
Userset Density Darker Setting Screen
Userset Density Lighter Setting Screen