Konica Minolta 7145 Instruction Manual page 187

Dividing an Image into Right and Left Pages (Dual Page) (continued)
7.
Select the desired copy mode and magnification.
• When selecting Facing pages mode and scanning from the platen glass,
select 1-1 or 1-2 copy mode.
• APS and AMS are released and 1.00 magnification is selected automatically.
Change the magnification manually, if desired.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original(s).
When using platen glass to scan, position the first page FACE DOWN with document
feeder kept open.
When using document feeder, position original(s) FACE UP.
For details on scanning originals in Front cover + Facing pages and Front/Back +
Facing pages mode, see the description on the following page.
10.
Press [START] to scan.
11.
Repeat steps 9 and 10 for all originals.
When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
DO NOT CLOSE the document feeder throughout the scanning job.
12.
Touch STORE to exit the Store mode.
13.
Press [START].
The copier will start printing when ready for output.
When the finisher / paper exit / inner tray capacity is exceeded due
to the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-23