Copying Using Special Paper (Multi-Sheet Bypass Tray) - Konica Minolta 7145 Instruction Manual

Copying Using Special Paper (Multi-Sheet Bypass Tray)

Use the Multi-sheet bypass tray to copy using special paper.
Specify the paper type to be loaded on the Multi-sheet bypass tray, as described below.
Do not use paper with any staples, or paper that conducts
electricity (silver, carbon, etc.), otherwise an accident may occur as
a result of fire.
To avoid machine trouble, do not use heat-sensitive paper, coloured OHP
film, or paper specifically designed for ink-jet printers, such as photo-paper.
When loading special paper in the main body tray or in the LCT to use on a
regular basis, the paper type should be specified in the Key Operator
setting. See p. 13-28.
1.
Open the Multi-sheet bypass tray, and load the copy paper.
See p. 2-28 for further details.
2.
Touch the Bypass key to highlight it.
The PAPER TYPE key will appear above the Bypass key. APS will be deselected, and
-A- will be highlighted on the Basic Screen.
3.
Touch PAPER TYPE.
The Paper Type popup menu will be displayed.
4.
Touch the desired paper type key.
When Thick Paper 1, Thick Paper 2, Thin, Rycycled Paper, Userset, Thin Paper,
OHP sheet is highlighted, a print job will conform to the selected paper type.
If no paper type indication is needed, touch Normal Paper.
The selection will be reflected on the Basic Screen when restored.
3-24