Inserting A New Staple Cartridge Into Sk-114 Saddle Kit - Konica Minolta 7145 Instruction Manual

Inserting a New Staple Cartridge into SK-114 Saddle Kit

When either of the two staple cartridges becomes empty in the SK-114 Saddle kit
mounted on FS-114 Finisher, the Basic Screen displays the following message in the
message area.
Follow the procedure below to replace the staple cartridge.
The screen message does not tell which staple holder is out of staples. Remove both
staple holders and check the cartridge to be replaced.
Use only the staples supplied by us. To purchase, please contact your
service representative.
1.
Pull the Saddle tray open and hold it as it is.
If the extensible tray of the Exit tray 1 just under the Saddle tray is
withdrawn, push it back to its original position, otherwise it may disturb you
in the following procedure or machine trouble may occur.
11-20