Konica Minolta 7145 Instruction Manual page 168

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
If using thick or other paper for covers, load them into the Multi-sheet bypass
tray and touch BYPASS in step 4.
Be sure that the trays for copy paper, front/back covers, and insertions have
the same paper size loaded.
2.
Touch APPLICATION on the Basic Screen.
The Application Selection Screen will be displayed on the touch panel.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
3.
Touch Sheet/Cover Insertion on the Application Selection Screen.
The Sheet/Cover Insertion Screen will be displayed.
4.
Select the cover and insertion sheet tray source.
Touch CHANGE TRAY to select the cover and insertion sheet tray source.
The same tray will be specified as the source of insertions and covers. If using thick or
other paper for covers, load them into the Multi-sheet bypass tray and touch BYPASS
individually on the screen.
If BYPASS is specified as the initial insertion sheet tray source in the Key
Operator setting, both cover and insertion sheet will be fed from BYPASS
only.
9-4