Table of Contents
Advertisement
Chapter 1 Introduction
Touch Panel Display Operations
■ Basic Features screen
This machine enables you to program the copy settings or set various types of modes in the
touch panel display. Messages due to paper jams or operational errors also appear on this
screen.
Message display
Displays guide messages
for operational
instructions and the
status of the machine.
Copy ratio display
Displays the current
copy ratio setting.
Reduce, Direct,
Enlarge
Press to enlarge or
reduce by a preset copy
ratio, or to reset the copy
ratio to 100%. (See
Enlarging/Reducing
Originals to the Desired
Size p. 3-20.)
Zoom
Press to specify the copy ratios, in
1% increments, or to freely
enlarge or reduce images in either
the vertical direction or the
horizontal direction by a copy ratio
of your choice. Enables automatic/
manual settings for your specific
needs. (See Enlarging/Reducing
Originals to the Desired Size p. 3-
20.)
Sorter
Press to sort copies made into
sets arranged in page order. This
mode can be selected only when
the sorter (optional accessory) is
attached. (See Sorting Copies
(Sorter) p. 3-56.)
* This screen shot appears when the sorter (optional accessory) is attached.
1-4
Remaining paper
quantity indicator
Displays the remaining quantity
of paper in the selected drawer.
(See Remaining Paper Quantity
Indicator Explanation p. 1-5.)
Two-sided
Press to make two-sided copies
from one-sided originals or facing
pages in a bound original, such as
a book, etc. (See Two-sided Mode
p. 3-45.)
Light, Auto, Dark
Press the [
the copy exposure to the desired level. Press the [A]
key to select Automatic Exposure Control. The
machine automatically adjusts the copy exposure to
the most appropriate level for the original. (See
Adjusting Copy Exposure p. 3-15.)
Copier Operator's Manual/Basic Operations
Paper size display
Displays the selected drawer.
Setting confirmation
Press to confirm the selected
mode settings. Enables the
more detailed screen for the
selected mode to appear in
the touch panel display.
Copy quantity
indicator
Displays the setting for the
number of copies to be made.
Paper select
Press to select Auto Paper
Selection, a drawer, or the
stack bypass.
(See Selecting the Paper Size
p. 3-2.)
Original Type
Press to select the setting
most suitable for the type of
original to be copied. (See
Selecting the Original Type p.
3-17.)
Special features
Press to select the Special
Features screen. You can select
or cancel the desired special
feature mode in addition to in the
Basic Features screen. Enables
the desired layout settings to be
selected. (See Special Features
screen p. 1-6.)
] key or the [
] key to manually adjust
Advertisement
Chapters
Table of Contents
