SOLTEK SL-75DRV2 User Manual page 85

Redstorm
Overclocking
Tech
CPU Vcore
Select
Auto Detect
DIMM/PCI CLK
Spread Spec-
trum
CPU Skew
Adjust
CHIP Skew
Adjust
PCI Skew Adjust Leave this field at default.
AGP Skew
Adjust
Please press <Enter> to start RED STORM OVER-
CLOCKING TECH, this option helps user an easy
way to overclocking, it will increase CPU external
clock automatically, when CPU external clock
increasing to unacceptable value, BIOS will restart
your system, then running at acceptable CPU
external clock.
This item allows users to adjust the CPU Vcore
voltage. The instant damage of CPU is due to the
wrong Vcore voltage setting, so we highly recommend
that user should leave this item to Default setting
unless you fully understand it.
This item allows you to enable/disable detect DIMM/
PCI Clock.
The choice: Enabled, Disabled.
This item allows you to enable/disable the spread
spectrum modulate.
The choice: Enabled, Disabled.
Leave this field at default.
Leave this field at default.
Leave this field at default.
85
Chapter 4 BIOS Setup