4-6.9 Frequency/Voltage Control - SOLTEK SL-75DRV2 User Manual

75DRV2

4-6.9 FREQUENCY/VOLTAGE CONTROL

Run the "FREQUENCY/VOLTAGE CONTROL" as following:
1. Choose "FREQUENCY/VOLTAGE CONTROL" from the Main Menu and
a screen with a list of options will appear:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Red Storm Overclocking
CPU Vcore Select
Auto Detect DIMM/PCI CIK
Spread Spectrum
CPU Skew Adjust
CHIP Skew Adjust
PCI Skew Adjust
AGP Skew Adjust
Use CPU Linear Freq
CPU Clock
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys.
<F1>: "Help" gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
Frequency/Voltage Control
Press Enter
Default
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Use Linear
100
84
Item Help
Menu Level