SOLTEK SL-75DRV2 User Manual page 70

75DRV2
VIA SUPERIO DEVICE
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
* Onboard FDC
Controller
* Onboard Serial
Port 1 / Port 2
* UART Mode Select The second serial port on your system may offer a
VIA SuperIO Device
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3
Disabled
Disabled
10
Select Enabled if your system has a floppy drive
controller (FDC) installing in the system board and
you want to use it. If you install add-in FDC or the
system has no floppy drive, select Disabled in this
field.
The choices: Enabled; Disabled.
Select a logical COM port name and matching
address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports.
variety of infrared port modes. Click here for a
description of various modes. (Click your browser's
Back button, or your right mouse button, to return to
this page.)
The choices: Standard; HPSIR; ASKIR
70
Item Help
Menu Level